Rosewood 1200mm x 2000mm 42mm x 32mm Vertical Internal Pool Batten Screens with Tubing Passing Through The Battens
Our internal pool screens are a great alternative to traditional glass pool fencing. This modern screening design where we pass your desired tubing (galvanised steel, powder coated steel or copper,) through the center of the battens has been a popular choice for screening for front fences as well as screening off pool areas. Our galvanised steel option is the thickest of the tubing we use having a 2.6mm wall thickness, where as the copper is at 1mm which is why we recommend having the copper sleeved.
By sleeving the copper it improves the rigidity whilst still allowing it to be curved onsite to suit your applications. We have suggested parameters in which the screens can be curved to which we can send through.
To install these screens you can either drill pilot holes through timber posts either side and feed the tubing of the panels through those holes and rear fix through the back of the post to secure the tubing and panel in place. With either method of installing you will need to ensure the gap spacing between the end of the last batten and the inside of the post does not exceed 100mm as this will fail compliance standards listed in AS1926.1 for pool fencing.
Our standard panels are 1200mm X 2000mm
Rosewood 42×32 Internal Pool Screen With Galvanised Tubing
1200×2000 = $322 per panel
Rosewood 42×32 Internal Pool Gate With Galvanised Tubing and steel frame
1200×918 = $549 per gate
Rosewood 42×32 With Copper Tubing
1200×2000 = $358 per panel
Rosewood 42×32 Internal Pool Gate With Copper Tubing and steel frame
1200×918 = $565 per gate
