2400 X 900 Heavy Duty Flat Fence Extension

Online Ordering / Quoting System

2400 X 900 Heavy Duty flat fence extensions are one of our most popular styles for pool compliancy because of their design, which appeases even the most strict pool inspectors. They are a specialized product as 900mm high extensions can’t usually be found in retail outlets. This size is not as common as 500 or 600mm high extensions but is great for those wanting a higher fence line.

We do advise caution when purchasing these panels especially if they are being placed on a fence line that is exposed to strong winds. The panels don’t allow the wind to pass through them so it is imperative that they are installed properly. Unless you are using these panels for pool compliancy we would recommend using our 2400 X 900 Heavy duty woven fence extensions because they allow the wind to pass through them.

You should also keep in mind that over time the palings will slightly shrink this will create small gaps in between the slats allowing a very minor amount of visibility. This won’t be an issue for pool compliancy as the gaps will only be a few millimeters but it might be an issue if you are after an extension that is totally blocked out. If this is what you are after you should look at our hardwood corral fence extensions or heavy duty woven fence extensions.

These heavy duty fence extensions are great for:

  • Providing privacy from neighbors
  • Providing security from strangers
  • Enhancing the image of an unsightly fence
  • Pool compliancy

Product specifications

This product is made from 100mm X 12mm palings similar to what is used for paling fences.

The short leg is approx. 1040mm. This sits on the post/rail side of the fence.

The long leg is approx. 1800mm. This sits on the paling side of the fence.

The dimensions of the leg are 70mm wide by 25mm thick.

The gap between the legs is approx. 30mm, this gives you ample room to fit the extension on top of a normal paling fence. If you have a colorbond fence please email us directly and let us know the width of the colorbond at the top of the fence and we will make custom panels to suit.

*If you have capping on your fence the panels will be made with different sized legs. One will be cut flush so it sits on the capping and the other leg will be 1800mm so that you can screw into your top and middle rails.

Suburb Cost Suburb Cost Suburb Cost
Abbotsford $40 Airport West $40 Albert Park $60
Altona $60 Armadale $60 Ascot Vale $50
Ashburton $60 Aspendale $60 Avalon $80
Baccus Marsh $80 Balwyn $60 Bayswater $60
Beaumaris $80 Bentleigh $60 Berwick $80
Black Rock $80 Bon Beach $75 Boronia $60
Box Hill $60 Braeside $60 Briar Hill $40
Brighton $60 Broadmeadows $40 Brunswick $40
Bulleen $50 Bundoora $30 Burwood $60
Campbellfield $40 Camberwell $50 Canterbury $50
Carlton $50 Carnegie $70 Caroline Springs $60
Carrum downs $60 Caulfield $60 Chadstone $60
Chelsea $70 Cheltenham $60 Chirnside park $60
Clayton $60 Clifton Hill $40 Coburg $30
Collingwood $40 Craigieburn $40 Cranbourne $80
Croydon $60 Dandenong $60 Deer Park $60
Doncaster $50 Donvale $60 Doreen $50
Eltham $50 Endeavour Hills $70 Epping $40
Essendon $40 Fairfield $40 Ferntree Gully $70
Fitzroy $50 Footscray $50 Forest Hill $60
Frankston $100 Glen Iris $60 Greensborough $40
Hampton $60 Hawthorn $50 Heidelberg $40
Hoppers Crossing $80 Ivanhoe $40 Keilor $40
Kew $40 Lalor $30 Lilydale $60
Macleod $50 Maidstone $50 Malvern $60
McCrae $80 Melton $80 Mernda $50
Middle Park $60 Mill Park $40 Mitcham $50
Mont Albert $50 Montmorency $40 Moonee Ponds $40
Mooroolbark $80 Morang south $50 Mt Waverly $60
Mulgrave $70 Narre Warren $80 Newport $60
Niddrie $40 Northcote $40 Nunawading $60
Oakleigh $60 Pakenham $80 Pascoe Vale $40
Plenty $50 Point Cook $60 Port Melbourne $50
Prahran $60 Preston $20 Reservoir N/C
Richmond $50 Ringwood $50 Rosanna $50
Rowville $70 Sandringham $80 South Yarra $70
Springvale $70 St Kilda $60 Templestowe $50
Thomastown $20 Thornbury $30 Toorak $60
Wantirna $50 Warrandyte $50 Watsonia $40
Werribee $80 Whittlesea $50 Williamstown $50
Wollert $50

 

2400 X 900 heavy-duty flat fence extensions are not overly popular so we don’t keep them in stock. We make the panels to order and lead times are roughly as follows.

Amount of panels Lead time
1-4 2-4 days
5-10 3-5 days
10- 20 3- 6 days
20+ 4-8 days

 

Fence extensions are relatively easy to install

The panels slip over the palings with the short leg going on the rail side and the long leg going on the paling side.

The fence extensions will generally straddle the posts unless they are exposed at the top of the fence.

If you have capping on your fence it is easiest to install from the rail side of the fence if possible, as usually the rails will be flush with the capping. If installing from the paling side you will need to position timber chocks behind the long leg before screwing into the palings and through to the rail on the other side.

We recommend 75mm galvanized chipboard screws for normal paling fences, as these are sufficient to screw through the leg into the palings and through to the rail on the other side. We do sell these.

$5 for 15 screws (enough for installing 5 panels)

$10 for 30 screws (enough for installing 10 panels)

$20 for 60 screws (enough for installing 20 panels)

We are now offering an installation service

This is ideal for those who don’t have

  • The know-how
  • The time
  • The tools

If this is something you are interested in then please email us photos of your fence line along with measurements if you have them so we can assess the job and work things out from there.

We are only offering a basic installation service, if your fence line is sloping and you are wanting the extensions to be altered onsite before being put up we would recommend using a tradesmen instead.

If it is a job that we are unable to assist you with we will recommend a tradesmen that is more suited to the job.